 |
 |
 |
 |
 |
 |
THE FAMOUS ZIP RAZOR PLANE III
ALL METAL CONSTRUCTION. TAKES STANDARD DOUBLE RAZOR BLADES
PRICE £3.99
BALSA STRIPPER £10.99
BALSA STRIPPER BLADES .40p
The finest tool yet devised for putting Z-bends into control rod wire. Special locating jig in the jaws makes Z-bends quick and easy. No modeller should be without these.
Z-BEND PLIERS £8.80
VELOSET (Aliphatic)
Very fast setting 125ml £2.25
ALIPHATIC RESIN
Hard line glue 125ml £2.25
EPOXY 5 MIN Quick Set 227grms £9.34
EPOXY 12 MIN Mid Set 227grms £9.34
EPOXY 30 MIN Slow Set 227grms £9.34
THIN CYANO 20grms £2.43
MED CYANO 20grms £2.43
THICK CYANO 20grms £2.43
THIN CYANO 50grms £5.51
MED CYANO 50grms £5.51
THICK CYANO 50grms £5.51
SUPERGLUE ACTIVATOR 200ml £5.45
DEBONDER 20ml £2.45
RED DEVIL
Ready Mixed Filler Super-Light £2.79
BALSA CEMENT TUBE
20ml £1.55
WE GUARANTEE OUR CYANO IS AS GOOD AS THE BEST!
Large plastic heads with extremely fine points. Will not
split the wood – TOP QUALITY
50 per box £2.80
EXCLUSIVE TO THE BALSA CABIN
Use to cover your valuable plans and building boards when building.
Sheets can be used time and time again as glues do not adhere to its transparent surface, NOT EVEN CYANO.
ENOUGH TO COVER TWO FULL SIZE PLANS £1.95
RUBBER BANDS
3" pack of 45 @ £1.20
4" pack of 38 @ £1.20
5" pack of 27 @ £1.20
6" pack of 21 @ £1.20
7" pack of 14 @ £1.20
8" pack of 12 @ £1.20
COCKPIT DECALS @ 90p
ADJUSTABLE CONTROL LINE HANDLE @ £5.50
FUEL CLIP A small plastic clip to fit over your fuel tube. When snapped shut will prevent fuel leaking from your tank. Pack of 5 @ £2.65 FUEL TUBE BUNGS Designed to attach to the fuel tube so they cannot get lost. Pack of 6 @ £1.10
NIPPLE LINKS
A solderless nipple that can be used on piano wire, bowden cable and plastic rod, instantly adjustable by slacking screw and sliding along. Length 25mm.
Pack of 10 @ £3.00
SWING-IN-KEEPERS
Used to retain 16 swg wire pushrod ends to servo
Pack of 10 @ £1.10
MINI SNAP LINKS
Nylon link for pushrods. M2 thread
Pack of 10 @ £1.10
MINI SNAP LINK & 8" ROD
As above with 8" rod
Pack of 2 @ £1.00
RUDDER HORNS
For rudder, elevator or ailerons. Two large and two small.
In pack, complete with BA nuts and bolts
Pack of 4 @ £1.95
FLAT HINGES
Nylon hinges, very smooth in operation
Pack of 10 @ £1.35
FLAT POLYPROPOLENE HINGE
Extremely flexible one piece hinge
Pack of 20 @ £1.25
ROUND NYLON HINGES Snap together hinge very easy to fit by drilling hole and adhesive and insert Pack of 10 @ £1.25
MINI METAL PIN HINGES
Flat nylon hinge connected with a metal pin
Pack of 10 @ £1.25
LARGE METAL PIN HINGES
Flat nylon hinge connected with a metal pin
Pack of 10 @ £1.40
MYLAR HINGE STRIP
Cut in to ½" widths for simple, effective hinge
Pack of 1" x 18" @ 60p
M2 METAL QUICK LINKS Pack of 10 @ £2.80 M3 METAL QUICK LINKS Pack of 10 @ £3.20 M3 METAL QUICK LINKS Pack of 4 @ £2.30
M2 8" RODS M2 12" RODS
Pack of 10 @ £1.90 Pack of 10 @ £2.00
M3 8" RODS
Pack of 5 @ £3.75
M2 METAL QUICK LINK & 8" ROD
Still the best adjustable connector
Pack of 2 @ £1.90
M2 METAL QUICK LINK & 12" ROD
Still the best adjustable connector
Pack of 2 @ £2.00
M3 METAL QUICK LINK & 8" ROD
Still the best adjustable connector
Pack of 2 @ £2.45
METAL EXTENDER
M2 threaded fitting for soldering to bowden cable etc
Pack of 4 @ £1.80
METAL EXTENDER & QUICK LINK
As above, complete with metal quick links
Pack of 2 @ £2.00
M2 NUTS Suitable for use as lock nuts for Metal Extender and Metal Rods Threaded One End. Pack of 10 @ 50p
M4 NYLON WING BOLTS AND CAPTIVE NUTS
Set comprises of 2 nylon M5 bolts and two nuts.
Per pack @ 65p
M4 STREAMLINE WASHERS
Pack of 4 @ £1.25
M5 NYLON WING BOLTS AND CAPTIVE NUTS Set comprises of 2 nylon M5 bolts and two nuts. Per pack @ 75p M5 STREAMLINE WASHERS Pack of 4 @ £1.25
M6 NYLON WING BOLTS & CAPTIVE NUTS
Set comprises of 2 nylon M6 bolts and two nuts
Per pack @ 95p
FUEL TUBE (5mm.O/Dx2mm.I/D)
Silicone tubing. Ideal for fuel lines or clunk tanks. 1 metre lengths.
Per pack @ £1.55
DIESEL/PETROL TUBE (4.5mm.O/Dx2.5mm.I/D)
Petrol/Diesel tubing. 1 metre lengths.
Per pack @ £2.65
8 SWG SADDLE CLAMPS
Saddle clamps for 8 swg wire
Pack of 4 @ 75p
10 SWG SADDLE CLAMPS
Pack of 4 @ 75p
Flat Single U/C CLAMPS Nylon plates for retaining u/c wire in grooved blocks Pack of 4 @ 75p FLAT DOUBLE U/C CLAMPS Nylon plates for retaining u/c wire in grooved blocks Pack of 4 @ 75p
PLASTIC CONTROL ROD INNER AND OUTER 1 metre length fitted with Mini Snap Link one end, light weight smooth operation, opposite end suitable for mini snap link, nipple link and Metal Extender. Pack of 2 @ £3.00
36" CONTROL ROD
2 fluted inner rod and 2 nylon outer tube
Per Pack @ £2.75
12 SWG STRIP AILERON HORNS
Complete with adjustable control horn and two bearings
Pack of 2 @ £1.40
180° Bell Crank
Moulded nylon with 6BA Screw and Nut
Pack of 2 @ 95p
BOWDEN CABLE
1 METRE LENGTH
@ £1.12
PUSH ROD EXIT
Pack of 4 @ 85p
SNAKE CABLE EXITS
Pack of 4 @ 85p
QUICK KEEPERS 14/16 S.W.G
Pack of 10 @ 85p
M2 ENGINE BOLTS (10mm) AND SPRING WASHERS AND NUTS
Pack of 4 @ £2.20
M3 ENGINE BOLTS (25mm), LOCKING NUTS AND WASHERS
Pack of 4 @ £2.20
M4 ENGINE BOLTS, LOCKING NUTS AND WASHERS Pack of 4 @ £2.20 M5 ENGINE BOLTS (40mm), LOCKING NUTS AND WASHERS Pack of 4 @ £2.20
ENGINE MOUNTS
Moulded in glass-filled nylon, motor easily fixed by self-tapping screws or nuts and bolts in pre-drilled holes, the face is grooved for nose leg.
The engine size quoted is only a guide to its suitability for the majority of engines.
To Fit Engine Size 19/30 @ £1.50
To Fit Engine Size 30/45 @ £1.70
To Fit Engine Size 45/61 @ £1.80
LONG SERIES ENGINE MOUNTS
These mounts are designed for use with 4 stroke engines or for use where an extended mount is required. Manufactured in red glass filled nylon.
M1 Large
Suitable for 10cc (60 cu in) engines @ £1.79
M2 Medium
Suitable for 6.5cc (40 cu in) engines @ £1.65
M3 Intermediate
Suitable for 6.0cc (35 cu in) engines @ £1.53
M4 Small
Suitable for 4.5cc (25 cu in) engines @ £1.39
M5 Mini
Suitable for 2.5cc (15 cu in) engines @ £1.30
M6 Baby
Suitable for 0.49/.09 cu in engines @ £1.17
PIANO WIRE (36" LENGTH)
6 swg £2.19
8 swg £1.80
10 swg £1.15
12 swg .84p
14 swg .55p
16 swg .52p
18 swg .46p
20 swg .43p
22 swg .39p
24 swg .38p
BRASS TUBE (12" LENGTH)
6 swg .65p
8 swg .55p
10 swg .55p
12 swg .55p
14 swg .52p
16 swg .52p
18 swg .52p
20 swg .52p
ALUMINIUM TUBE (12" LENGTH)
6 swg .70p
8 swg .60p
10 swg .60p
12 swg .57p
14 swg .57p
16 swg .57p
18 swg .57p
20 swg .57p
AIRTRAP WHEELS
High quality injection moulded rubber tyre, with constant wall thickness. Metallic silver 8 spoke nylon hub.
1 ½ dia 10 s.w.g hole 85p each
1 ¾ dia 10 s.w.g hole 90p each
2" dia 10 s.w.g hole £1.10 each
2 ¼ dia 10 s.w.g. hole £1.05 each
2 ½ dia 8 s.w.g. hole £1.35 each
2 ¾ dia 8 s.w.g. hole £1.45 each
3" dia 8 s.w.g. hole £1.50 each
3 ½ dia 8 s.w.g. hole £2.35 each
4" dia 6 s.w.g. hole £2.50 each
5" dia 6 s.w.g. hole £12.90 per pair
TAIL WHEEL
Moulded rubber tyre on an nylon hub
¾" dia 16 s.w.g. wire 65p each
1" dia 16 s.w.g. wire 80p each
1 ¼ dia 16 s.w.g. wire 90p each
TAIL WHEEL
Moulded rubber tyre on an aluminium hub
1" dia 16 s.w.g. wire £1.10 each
1¼ dia 16 s.w.g. wire £1.25 each
TAIL WHEEL BRACKET SET
Comprising: tailwheel, 2 screws, nylon bracket, aluminum collet, heat treated spring wire and wheel retaining fastener.
1" £2.25 each
1¼ £2.50 each
ROUNDED SPONGE WHEELS
45mm £2.14 per pair
51mm £2.19 per pair
57mm £2.25 per pair
64mm £2.69 per pair
70mm £2.93 per pair
76mm £3.09 per pair
WHEEL COLLETS
High quality brass, for retaining wheels to undercarriage and nose leg.
6 swg 5mm approx.
8 swg 4mm approx.
10 swg 3mm approx.
Pack of 4 complete with allen screws and key @ £1.85
SMALL COLLETS
High quality brass.
12 swg
14 swg
16 swg
Pack of 4 complete with allen screws and key @ £1.85
EACH
SCALPEL HANDEL NO.3 £2.50
SCALPEL HANDLE NO.4 £2.50
SCALPEL HANDLE NO.7 £2.50
SCALPEL HANDLE NO.9 £2.50
BLADES (TO FIT THE HANDLES 3, 7 or 9)
No.10 Five Blades per packet 60p
No.10a Five Blades per packet 60p
No.11 Five Blades per packet 60p
BLADES (TO FIT HANDLE NO. 4)
No.22 Five Blades per packet 60p
No.25a Five Blades per packet 60p
No.26 Five Blades per packet 60p
Various colours available - Blue, White, Red, Black and Yellow. We also have Orange available in 3" only.
1 1/2" .66p
1 3/4" .69p
2" .72p
2 1/4" .78p
2 1/2" .85p
2 3/4" .89p
3" £1.85
Available in various sizes.
2oz £1.65
4oz £1.70
6oz £1.80
8oz £1.90
10oz £2.37
14oz £2.75
20oz £3.80
10 THOU A4 ACETATE SHEET £1.20 per sheet
30 THOU A4 ACETATE SHEET £2.79 per sheet
45 THOU A4 ACETATE SHEET £3.39 per sheet
1/16 £1.09 each
3/32 £1.39 each
1/8 £1.75 each
